How to Keep Your Fritz-Kola Cap Looking New

By fritz-kola | Published: 2026-10-16

Category: Tips & Care

A simple cleaning and storage routine to protect the shape, embroidery and colours of your fritz-kola cap, including the fritz-kola x ur so cool cap.

Quick answer

Hand wash your fritz-kola cap in cool water with a drop of mild detergent, rinse it thoroughly, then reshape the crown and let it air dry over a bowl or towel. Never put it in a hot washing machine or tumble dryer. If you own the fritz-kola x ur so cool cap, treat the stick embroidery the same way: no scrubbing, no soaking, just gentle dabbing. This keeps the shape, the recycled and organic cotton blend, and the colours intact.

Why your cap needs a different routine than your shirts

Caps are built around a structured crown and a curved brim. A standard washing machine cycle can crush that structure, and high heat can shrink or warp the fabric. Even a gentle cycle puts stress on the seams where the brim meets the crown. Hand washing gives you control over temperature and agitation, which is exactly what a cap needs.

The fritz-kola x ur so cool cap is made from recycled and organic cotton and carries a stick embroidery. That embroidery is not as tough as a flat print, so it should never be rubbed or twisted. Treat the cap as a delicate item, not as a heavy-duty garment.

Spot clean between washes

Most caps do not need a full wash every week. If you only wore it for a short walk, a spot clean is enough. Mix a few drops of mild liquid soap in cool water, dip a soft cloth, and dab the sweatband and any visible marks. Do not rub the embroidery or the front panel. Let the cap air dry completely before wearing it again.

This approach saves the fabric from unnecessary wear and keeps the shape stable for longer. It is also the fastest way to deal with a small smudge on the brim.

Drying and reshaping without a cap rack

After washing, gently squeeze out excess water with a clean towel. Do not wring or twist the cap. Then place it over a small bowl, a jar, or a rolled towel so the crown holds its rounded shape while it dries. Keep it away from direct sunlight and radiators, because heat can fade colours and weaken the fabric.

If the brim looks slightly bent after drying, you can gently steam it and press it back into shape with your hands. Let it cool completely before wearing. Never use an iron directly on the cap.

Storing your cap so it keeps its shape

Hang your cap on a hook or place it on a shelf where nothing rests on top of it. Avoid stuffing it into a tight bag or leaving it under heavy items. If you need to pack it for travel, fill the crown with a soft cloth or a rolled sock to prevent it from collapsing, then place it at the top of your bag.

For long-term storage, keep the cap in a cool, dry place. Humidity can encourage odours and weaken the embroidery over time.

Your step-by-step fritz-kola cap care routine

1. Check the label and empty the cap: Look inside the cap for any care label and remove pins or clips. If there is no label, default to cool hand washing. Mistake to avoid: assuming it is machine safe because the fabric feels sturdy. When in doubt, hand wash.
2. Pre-treat marks with a soft cloth: Dab a tiny amount of mild detergent onto visible stains using a soft, light-coloured cloth. Work from the outside of the stain inward so you do not spread it. Mistake to avoid: scrubbing the embroidery or using a stiff brush. Dab, never scrub.
3. Hand wash in cool water: Fill a basin with cool water and a drop of mild detergent. Submerge the cap and gently press it down a few times. Let it sit for no more than five minutes. Mistake to avoid: hot water, which can shrink the fabric and fade the colours. Cool water, short soak.
4. Rinse thoroughly and squeeze gently: Rinse under cool running water until no soap remains. Press the cap between two clean towels to remove excess water. Mistake to avoid: wringing or twisting, which distorts the crown and brim. Press, do not twist.
5. Reshape and air dry: Place the cap over a bowl or a rolled towel to hold the crown shape. Let it air dry at room temperature, away from direct heat or sunlight. Mistake to avoid: using a tumble dryer or a hair dryer, which can shrink the cap. Air dry only, with support.
6. Store it properly: Once dry, store the cap on a hook or a shelf where it will not be squashed. For travel, fill the crown with soft fabric and pack it on top. Mistake to avoid: leaving it in a hot car or a damp gym bag. Shape saved, cap ready for the next wear.

The cap in this guide

fritz-kola x ur so cool cap: Made from recycled and organic cotton with an exclusive fritz-kola x ur so cool design and a stick embroidery. The recycled and organic cotton blend responds well to cool hand washing, while the stick embroidery needs gentle handling to avoid snagging or distorting.